UCP - UKP
This is the most popular unit and is universally used in all types of the transmission devices. UCP Type is fixed at the shaft in a simple and reliable manner by the two set screws and UKP Type by use of the adapter.

UCPA - UCPAN
This type is very convenient, since they can be used even if operating space is restricted. It can be fitted with bolts from the underneath of the base.

UCPH
This type of pillow block is designed as pedestal with increasing the center height. It is especially applied to a fan or blower. The unit is comparable to UCP2 type under normal shock load. Life is prolonged and maintenance costs are lowered.

UCHA
UCHA2 type Hanger Bearing Unit is mounted on a frame work of a conveyor by means of screwed pipe. The housing is rigid but of the smallest possible size. Lubrication is achieved by means of nipple through tubing.

BLP
BLP2 type Pillow Blocks are used as light-duty units, in which SB2 type Bearings respectively are fitted. BLP2 type is fixed with the set screws.

BLF
BLF2 type Flange Units consist of SB2 type Bearing and cast iron flange housing respectively. BLF2 type is fixed with the setscrews.

UCF -UKF
This bearing unit is square in form and is designed to fix at the side of the machine by means of 4 sets of bolts. It is most extensively used as the flange type unit. The mounting method is either with the set screws (UCF Type) and with the adapter (UKF Type).

UCFL - UKFL
This housing is rhombus in form and is mounted at the side of the machine by means of 2 bolts. This is useful in saving the space and weight. UCFL Type is set at the shaft by use of the set screws and UKFL Type by use of the adapter.

UCFC - UKFC
This housing is round in form and equipped with spigot at the mounting face. This is most suitably applied to the assembly where the precision assembling is required. UCFC Type is fixed with the set screws and UKFC Type is mounted with the adapter at the shaft.

UCFS - UKFS
The housing is square in form and has spigot at the mounting face as UCFC Type. Accordingly, the exact positioning can be arranged, without the eccentricity. The mounting to the shaft is made either by the set screws (UCFS Type) or the adapter (UKFS Type).

UCFA
Adjustable Flange Unit has a two-bolt base with one side adjustable, enabling distance from center of shaft to be varied. Regarding their efficiently, advantages and disadvantages, it is similar to UCF2 type with a four bolt base.

UCFB
UCFB2 type Flange Unit is a versatile unit used on extension or hanger and designed for housing confined spaces which do not allow use of Pillow Block and Flange Units.

SBPP
SBPP2 type Pillow Block are types of which SB2 type with set screw bearings are assembled respectively into a two-piece pressed-steel housings. The housing is suitable for light duty applications, where providing normal Pillow Block are used.

SBPF
SBPF2, SBPFS2 type Flange Units are types which SB2 with set screw type Bearings are assembled respectively into two piece pressed-steel housings. For SBPFS2 Types, the bearing is covered by the steel plate and therefore the dust-proof property is outstanding.

SBPFL
SBPFL2 type Flange Units consist of two interchangeable pressed-steel housings in which SB2 type wide inner ring bearing is assembled. Easy to install, the PFL type Flange Units provide a low-cost power transmission units with moderate capacity for radial or thrust combined loads.

UCC - UKC
The outer diameter of this housing is determined of the cylinder which is subjected to the precision grinding. This unit can be used as the normal bearing, utilizing the automatic center alignment. UCC Type is set at the shaft by use of the set screws, and UKC Type by use of the adapter.

UCT - UKT
The structure allows the free movement of the unit, due to the sliding slot at the side of the housing. This unit is most suitably used to the tension bearing for belt conveyor or to the place where the shaft distance must be adjusted. UCT Type is set at the shaft by use of the set screws and UKT Type by use of the adapter.

UCTH
UCTH2 type Framed Take up Unit for UCT2 type Take up Unit is designed for maximum strength, and is a rigid mono-frame of cast iron. The unit can freely be adjusted along length of the steel tracks.